Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.
If you're looking to clean the shelves and bins of your Samsung french door fridge, it is good to know how to correctly remove the shelves and bins so you can get a deeper clean. Ensure that food is out of the way, or if possible completely removed before removing the shelves and bins.
Follow the guide below for correctly removing the shelves and bins of your french door fridge.
01. Fridge Shelf
Step 1. Make sure to fully open the corresponding door before you remove a shelf.
Step 2. To remove, hold the front part of the shelf and slowly lift it up and slide it out.
To reinsert, hold the shelf at an angle so the front is higher than the back, and then insert the top hook into the top shelf notch. Then, lower the shelf and insert the bottom shelf hook into the bottom shelf notch.
Note:
- Do not lift up the shelf fully when removing or reinserting the shelf. Doing so can damage the rear wall of the fridge.
- The tempered glass shelves are heavy. Use caution when removing them.
- Glass containers may damage the surface of glass shelves.
- The actual design of the compartments may differ from your model.
03. Fridge Drawers/Crisper Drawers
Step 1. Gently lift up the front of the drawer and slide out.
It is recommended that you remove the door bins before removing the drawer. This is to prevent damage to the door bins.
To reinsert, insert the drawer into the frame rails and then slide inward.
04. Freezer Basket
1. Fully open the freezer drawer.
2. Lift the ice bucket to remove it.
Note:
- Do not twist the basket when removing or reinserting the basket. The basket can be scratched.
- To prevent physical injury, property damage, or suffocation, keep children away from freezer baskets that have been removed.
- Do not remove the divider.
- Put the wheels of the upper basket on the end of the rails of the lower basket. Then, slide the upper basket all the way to the front. Otherwise, the drawer will not open or close properly, which will cause frost to build up.
- The sliding drawers of the freezer cannot be removed
Upper Freezer Basket
1. To remove, fully slide open the freezer drawer. Lift up the front of the upper basket and pull to remove.
2. To reinsert, align the front wheels of the upper basket with the end of the lower basket. Slide the upper basket to the front.
Lower Freezer Basket
1. To remove, first remove the upper basket. Then, tilt up the front of the lower basket to pull out.
2. To reinsert, put the basket onto the rail assembly rear side first.
If you require further assistance, please consult the user manual from our Manuals & Downloads page or contact our Samsung Care Australia experts on 1300 362 603 (Toll Free in Australia). You can also contact our Chat Support team or reach us through Samsung Members Community.
