Smart home or office is a sophistication, with or without technology.
Let's build a stable and secure, Smart home, to protect you from IoT hackers.
This will help communicate a Smart life.
Enter the Router, via the IP address found in the modem documentation or manual.
WiFi network, must be active in Main network to access Router settings.
When preparing an installation on a Mobile device for the first time.
Turn Off / Disable all access points under advanced settings, that can be used by hackers, to gain access to the Router.
These include, but are not limited to:
- WPS
- MAC Filtering
- DMZ
- UPnP
- Access Sharing / Folder Sharing
- Print Server (This is for a network, that can choose to share a printer)
- Bandwidth Control (Not recommended, may cause problems with data or device usage)
- IP & Mac Binding
- Access Control (Re-enable, when finished at the end of this post)
Enabled, could be a result of your router making some smart devices public.
Initial Setup First point of business, Advanced / Wireless / Wireless Settings, find Hide SSID for both 2.4 GHz and 5 GHz.
Learn more:
Brett Hutton
